;*******************************************************************************
             258sa0   readme
;*******************************************************************************
#------------------------------------------------------------------------------#   
BIOS version   	: 1.09
EC version      : 1.06
date      	: 2005/05/06

fixed bugs	: 
EC fixed bugs   : 1.Fix therma IC read byte issue.
		  	       	                            
checksum	: 258sa5.109    BB14H
                 
VGA BIOS        : 2005.986
#------------------------------------------------------------------------------#

#------------------------------------------------------------------------------#   
BIOS version   	: 1.08
EC version      : 1.05
date      	: 2004/06/07

fixed bugs	: 1.remove Enhance speed step function(Added in 1.07)
		  2.solve press F2 OEM logo will hang up
		  3.solve P4 TPT cpu AC in/out will hang up
EC fixed bugs   : 
		  	       	                            
checksum	: 258sa5us.108  6AB8H 
VGA BIOS        : 2005.986
#------------------------------------------------------------------------------#

#------------------------------------------------------------------------------#   
BIOS version   	: 1.07
EC version      : 1.04
date      	: 2004/03/27

changes		: 1.add new speed step function
		  2.add bootup beep disable/enable in cmos setup(standard)

checksum	258sa5us.107  6DF8H 
VGA BIOS        : 2005.986

#------------------------------------------------------------------------------#   
BIOS version   	: 1.06
EC version      : 1.03
date      	: 2004/02/26


EC fixed bugs   : 1.smart power *6
		  2.solve under s3 mode AC out S3 auto resuming.
	       	                            

checksum	: C815H

VGA BIOS        : 2005.986
#------------------------------------------------------------------------------#

BIOS version   	: 1.04
EC version      : 2.01
date      	: 2004/01/27

fixed bugs	: 1.solve boot duration battery plug in/out will into s1
		  2.solve RST test fail for DDR 400
		  3.solve press power button can't resume after use lid switch into stand by. 
		  4.solve solve press fn+f7 and f8 sound will delay
		  5.solve s3 resume and press "ctrl+alt+del" lcd will ficker
		  6.solve samsung RAM DDR 333 can't boot
	       	  7.solve use 2.8G and 3.2G fsb 533 in low temperature can't boot                         
added function  : 
EC fixed bugs   : 1.solve NS87591 Chipset bug
		  2.solve temptuare aout open system
		  3.SmartPower level * 15.
	       	                            

checksum	: 258sa0.104    701EH
#------------------------------------------------------------------------------#   
BIOS version   	: 1.03
EC version      : 
                  STENDARD  2.00 (for smart power *15)
date      	: 2003/12/04

fixed bugs	: 1.solve stand by can't resume from lid switch
		  2.solve solve press fn+f7 and f8 sound will delay
		  3.solve s3 resume lcd will ficker
		  4.solve samsung RAM DDR 333 can't boot
	       	                            
added function  : 1.add dos mode test media KEY funation

EC fixed bugs   : 1.SmartPower level * 15 (For Stendard).
		  2.APC > 50 watt SmartPower return does not delay 10 sec. 
		  3.LID into S3 Power button resuming garbage.
		  4.S3 resuming send 0x07 event for mobile CPU.
		  5.Debug Mobile CPU do throttling error.
		  6.Thermal level * 2 (For Stendard).
		  7.Thermal level * 2, in Mobile CPU throttling table must * 2 (For Stendard).
		  8.FSC release 1.02 SmartPower Level * 6.

checksum	: 258sa0.103    211AH
                  258sa0_c.103  0F36H 
VGA BIOS        : 2005.986
#------------------------------------------------------------------------------#   
#------------------------------------------------------------------------------#   
BIOS version   	: 1.02
EC version      : 1.01
date      	: 2003/10/29

fixed bugs	: 1.change all subsystem ID                             
added function  : 
		

checksum	: 258sa0.102    1083H
                  258sa0_c.102  8DD4H 
VGA BIOS        : 2005.986
#------------------------------------------------------------------------------#   
;=============================================================