HOW TO FLASH THE BIOS

 First download BIOS data and extract to your hard drive.

A. Under MS-DOS

1.  UPDATING KEYBOARD BIOS

Make sure the AC adapter is connected to your notebook before you run this utility.

 1-1.           Make a clean Boot Disk which has no config.sys and autoexec.bat files.

1-2.           Copy following files into Boot Disk:

                ecf080.exe    and    XXXXX.bin(Keyboard BIOS File)

 1-3.           Boot from the Boot Disk,  at MS-DOS prompt  A:\> type: 

                ecf080  XXXXX.bin /a    then press Enter key.  

The computer will shutdown automatically after installation is complete.

2.  UPDATING SYSTEM BIOS

Make sure the AC adapter is connected to your notebook before you run this utility.

 2-1.           Repert step 1-1.

2-2.           Copy following files into Boot Disk:

                f82734.exe and   XXXXX.rom(System BIOS File)

 3-3.           Boot from the Boot Disk,  at MS-DOS prompt  A:\> type:

                f82734  XXXXX.rom    then press Enter key.

 3-4.           Reboot the computer After system BIOS is updated, go to BIOS setup and
                load DEFAULT setting.

B. Under Windows 98SE

If the system is operating under Windows 95/98. Restart computer, press F8 and
select Safe and Command prompt only.  At Windows 95/98 MS-DOS prompt,
follow the steps in Under MS-DOS above to run this utility.

 Note:

 Please Update Keyboard BIOS FIRST, then update System BIOS.